Garage Floors
A ground, patched and sealed garage floor that shrugs off ice melt, hot tires and oil — and wipes clean with a shop broom.
Learn More
Boulder sits about 25 miles northwest of Denver, at the base of the foothills. We are based on the northeast side of Denver and drive up for the work. What we find in Boulder is a high-end remodel market sitting on old concrete. The median Boulder house was built in 1977, and about 7 percent of them predate 1940.
That is why metallic epoxy floors come up more often in Boulder than in most of our service area. People here spend on the finish, and the garage or basement is often part of a larger remodel. The slab underneath is usually decades old, so prep decides how the floor turns out.
Tell us about your project — we’ll get right back to you.
Mapleton Hill became Boulder's first historic district in 1982. It holds around 500 homes, and more than half of them went up before 1910. Whittier, just east of downtown, is not far behind in age.
Those blocks were platted with alleys, so the garages are detached and sit off the lane. A detached Boulder garage is almost always unheated. From October on that decides the product, and polyaspartic keeps curing at temperatures where epoxy quits.
Slabs that old bring their own list. Many were poured with no vapor barrier under them, so we test for moisture first. Cracks get chased out and filled, and spalled areas get patched and leveled before anything goes down.
Boulder's charter caps buildings at 55 feet, and city zoning holds most of the town to 35. Adding height is hard here, and the city has argued over pop-tops and scrapes for years. Remodel money tends to land on what is already standing.
A metallic epoxy floor fits that market. The pattern is worked by hand while the coat is still wet, so no two floors match. Boulder houses carry a lot of glass, so we put a UV-stable polyaspartic clear over the top. That keeps the color from ambering in the sun.
Where the slab is sound and the floor should read as concrete, polished concrete is the other route. It suits the modern architecture going up around North Boulder.
Boulder's commercial work leans toward labs and production rooms rather than big warehouses. NCAR, NIST and NOAA all sit in the city. The Diagonal corridor out toward Gunbarrel carries most of the flex and light industrial space. A fair amount of it gets converted to lab use.
A lab or shop floor is specified around what lands on it. Solvents, acids, wash-down water and cart traffic each pull the spec a different way. Tell us what gets spilled and we match a system to it. Full detail sits on our commercial and industrial coatings page.
Communities & areas we serve around Boulder: Mapleton Hill, Whittier, Newlands, North Boulder, Table Mesa, Martin Acres, Gunbarrel.
Boulder ZIP codes served: 80301, 80302, 80303, 80304, 80305.
A ground, patched and sealed garage floor that shrugs off ice melt, hot tires and oil — and wipes clean with a shop broom.
Learn More
A UV-stable coating that cures in hours instead of days, goes down in cold weather, and does not amber in the sun like epoxy.
Learn More
Hard-wearing epoxy systems for garages, basements, shops and commercial spaces — installed over properly ground and repaired concrete.
Learn More
A sealed, warm-looking basement floor that stops concrete dust, cleans easily and does not turn into a problem when water shows up.
Learn More
Marbled metallic finishes with real depth — poured, worked by hand and sealed. The floor people actually comment on.
Learn More
Vinyl flake broadcast into the base coat, then sealed — texture underfoot, hides dirt and wear, and it is the best value in coatings.
Learn MoreA few of the questions we hear most around Boulder. Don't see yours? Call us — we're happy to help.
Bare garage slab, a basement you are finishing, a peeling floor that needs redoing, or a shop floor that has taken all it can? Call or send the form and we will walk the floor with you and hand you a free written quote.
Tell us about your project — we’ll get right back to you.